- Available Sections
- Black (369) Chrome (41) Clear Glass (48) Cream (0) Grey (92) Orange (0) Red (2) Silver (41) White (151) Wood (246) Ash (5) Cherry (0) Mahogany (3) Oak (210) Pine (11) Walnut (149)
- Alphason (118) Apollo Hi-Fi (1) Atacama (9) AVF (210) B-Tech (55) Baumhaus (17) BDI (37) Besp-Oak (1) Centurion Supports (3) Core Products (14) Dorel (11) Frank Olsen (32) Hama Products (6) Jual (21) Julian Bowen (1) Just Racks by Spectral (10) Maja (4) Mason and Bailey (53) MDA Designs (81) Mount Massive (1) Multibrackets (9) Novogratz (1) Off-The-Wall (1) Optimum (18) Premier Mounts (2) Sanus (2) Spectral (5) Stealth Mounts (7) TNW (61) TTAP (16) Ultimum (19) ValuFurniture (14) Vogels (19) World Mounts (1)
SAVE A FURTHER £10.00 TODAY USING VOUCHER CODE JUAL10 AT THE BASKET
£319.00
£399.00
Save 20%
Adding to Basket
Please Wait...
Please Wait...
The Jual Curve JF702 Oak Open TV stand is a stunning piece of furniture boasting fabulous curved Oak edges, this TV stand is a distinctive piece of furniture that will suit any room in the house. The ash spindle legs are individually height adjustable to compensate for any uneven floors. Cables can be managed through the rear panel to keep everything tidy.
- Real Wood Veneer
- Solid Wood Spindle Legs
- Suitable For TV's up to 50"
- Cable Management
- Matching Furniture Available
- Dimensions: W 1320 x D 400 x H 500 mm
Warranty | 1 Year |
Max TV Weight | 30kg |
Manufacturer | Jual |
Stand Colour | Oak |
Stand Width (mm) | 1320 |
Stand Depth (mm) | 400mm |
Stand Height (mm) | 500mm |
This product is also known as:
JF702 , Jual Lounge
JF702 , Jual Lounge
Jual Lounge Collection Range View full range

Please Wait

alan aikman
26/11/2021
Our curved unit is being used as a coffee table as the size is perfect and matches our tv unit.

colin barber
19/09/2020
The cabinet attracted me beacause I liked the curved edges. I did not use the legs as I wanted a low level cabinet to fit under the TV with a large centre speaker on top. The unit is fairly good quality but there are issues. The cam bolts when screwed in on my one, we’re not vertical, so the top half would not slot over them. I carefully straightened them to make it fit, otherwise it would have been sent back. The slight disappointment for me was the veneer. Whilst ok on the top surface and the inside of the bottom surface, there is no veneer on the underside of the top surface, and you can see it quite clearly. The cable hole in the middle is poorly located as you can fit two units side by side, but then all the cables are visible in the centre. I am quite good at diy, so I filled that hole and made two new ones behind where the units sit, so no cables are visible. In my view it is overpriced, after all it is only plywood underneath. Whilst I am happy with it now, it could be improved.
People who viewed this product also viewed
Alternative Products