Ultimate Mounts UM401 TV Stands

Yes, it is height adjustable. I have a 65" Curved TV mounted on one and a 55" TV mounted on a second stand. It is very secure and well built. I cannot give you exact dimensions but my 65" TV base is mounted 8" from the cupboard it stands on and can go about another 3" to 4" lower. Height wise the adjustment is around 12" approx. Once mounted on the rear of the TV it is an easy job to adjust the height. It also swivels. I really love it. Hope this helps.

i use this tv stand for a samsung 65 inch tv ,i can swivel the set a long way.at present i have a gap of 280mmfrom bottom of tv and base of stand,but this can be increased or decreased depending where i hang it,[ hope this helps you ,

Have purchased 2of these stands for a 65" and a 55" television and did find them a sturdy and versatile stand with good adjustment range

As mine is mounted on a unit and the TV is quite large (50" Plasma, quite heavy) there is no space for any shelf. This a a bracket designed to be fitted on a flat surface i.e floor or unit. I researched these brackets for a while and eventually decided in this one. It is a good solid bracket and well worth the money. Hope that helps

Hy you will have no problems with this stand the fixing at the back are numerous and allow for all of the screens I have seen,it is one hell of a sturdy unit and looks very classy also there is a fair of side to side movement allowing the screen to be seen at all angles.
Good luck and enjoy your new Stand as I do.kevin

Hi Jamie, it has been a while since I set up mine and I am also very happy with it, by the way.
However, I am not as positive as Kevin about whether it will fit your TV without some of the frame being visible. As long as you buy online or over the phone, you will have the ability to take it or send it back for a refund if there are problems.
The permutations for a good fit are quite extensive and it may be that you could use the top holes for the totally secure 'height' fit and the bottom slots (which you are right about) as the secondary means of securing the TV. It is always more reassuring when the bolts go through a dedicated hole in the frame, but the slots should work OK too. Just check that 4 of the bolts supplied are the right size and length for your TV, not all manufacturers are forthcoming about the maximum screw length you can put into the back of the TV without damaging components.
If you can make it work for you, I am sure you won't be disappointed with the result. Good luck.

I used this stand for my Panasonic Vieira it's well made and adjustable,I can not say whether it is suitable for your TV

Hi my television is a LG 52" and the stand is fine with no problems

Hi Max. Not sure about the Panasonic model you have referred to but I have a 50 inch Panasonic mounted on it with no problem. I have placed the mount on a corner stand as I prefer not to look downward at the TV. You will see from the picture I have attached that I also have a soundbar beneath the TV. My TV is on the lowest height option on the bracket because of the use of the stand. Hope this helps but if you need more, I am happy to help.

It's heavy and sturdy, I have a 65 inch on it.

sorry I don't know-it does come with it's own bolts if that helps