EIR12V 10FT Full Details
The quality of material is the most important aspect of any projection screen. Most screens on the market will a very basic compressed cloth type material resulting in a creased surface and poor contrast performance.
The Cyber Series projection screens use a US manufactured high quality multi-ply material with a high contrast and low gain of 1.1. The projection screen material is tear resistant, fireproof, wrinkle proof and is designed to hang perfectly flat. The center layer is a glass fibre net producing a flex rate of less than 1% compared with the industry average of 33%. The front layer optimises contrast and reflectivity while a black PVC backing prevents light leakage and helps retain a uniformly flat projection surface.
Built-in Infra-Red Remote Control and Projector Trigger
All Cyber electric screens feature built in infra-red remote control and come with a simple hand held remote. The IR receiver is located on the front of the curved base but should the screen be installed behind a pelmet or recessed into the ceiling, a small external IR eye is included. Also included is a 12v trigger input, this allows the screen to be activated from any projector or surround sound amp with a 12v output. A 10m mono mini jack cable is included to connect the screen to a 12v output device.
Case and Motor Design
The aluminium diamond white case has an elegant curved profile making it one of the nicest looking screens on the market. The rigid sturdy design keeps the internal roller perfectly straight and any motor noise to a minimum. The Cyber series projector screens all use SOMFY motors, the same motors found in the likes of Dalite and Stuart cinema screens.
Cyber projection screens feature one of the best mounting systems on the market. Two small brackets fit to the wall or ceiling anywhere along the length of the case. Once the screen is clipped into the brackets an aluminium lever secures it in position. The screen can only be lifted off the brackets when the lever if pressed in.
Other Features and Measurements
Just like televisions, projector screens are measured in imperial feet and inches. The screen is measured by the width of the material from left to right. The standard sizes are 6ft, 7ft, 8ft and 9ft. The viewable area is the white part of the screen which is slightly smaller due to the surrounding black borders.
- 10ft Wide Projector Screen
- 16:9 Aspect Ratio
- 12v Trigger
- External IR Receiver also included
- IR Remote included
- 10m Mono mini jack cable included
- Ceiling or Wall Mount "L" Shape Bracket
- High Quality Multi Ply Material
- High Contrast and Low Gain of 1.1
- Glass Fibre Net Center Layer Produces Less Than 1% Flex Rate
- Black PVC Backing Prevents Light Leakage
- Tear Resistant, Fireproof and Wrinkle Proof
- Overall Dimensions: W 3353 x D 137 x H 2243
- Screen: W 3055 x H 1718
- Roller: W 3353 x D 137 x H 145
| Products Features
|| Hide / Show
This product is also known as:
Cyber Series , Projector Screen , Electric IR 12V Trigger Projector Screen , EIR12V